Table of Contents
Advertisement
Portable Alarm Clock Speaker
System for your iPhone / iPod
Questions? Visit www.ihomeaudio.com
Model iP16
®
Solución De Problemas
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material
should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine,
thinner or similar materials can damage the surface of the unit.
NOTE: Be careful not to touch the surface of the speakers at either end of the unit
Thank you for purchasing the iHome iP16 Audio Speaker System for your iPhone/iPod. Designed
specifically to work with your iPhone/iPod, this system provides high quality audio performance that
brings out the best in your music.
Please read this instruction book carefully before operating the iP16 and keep it for future reference.
Check for iPhone/iPod compatibility
iP16 is an advanced system and supports most updated iPod features. To make sure your iPhone/iPod works properly
with iP16, please update your iPhone/iPod firmware with the latest version via iTunes.
Table of Contents
Maintenance
Getting Started
1
2
3
3
4
4
4
5
6
7
7
8
9
10
11
Advertisement
Table of Contents
Related Manuals for iHome IP16
Summary of Contents for iHome IP16
-
Page 1: Table Of Contents
Please read this instruction book carefully before operating the iP16 and keep it for future reference. Check for iPhone/iPod compatibility iP16 is an advanced system and supports most updated iPod features. To make sure your iPhone/iPod works properly with iP16, please update your iPhone/iPod firmware with the latest version via iTunes. -
Page 2: Quick Start
• Press & Hold the Clock Adj. button on the back of the unit until the hour display flashes. • Press the + or - buttons to set the hour, then press the Clock Adj. button • Press the + or - buttons to set the minutes then press the Clock Adj. -
Page 3: Controls And Indicators
Alarm Button Press and hold for Alarm Setting mode The iP16 uses a CR2032 button cell battery (included with instructions) to keep alarm and clock settings in the event of a power failure and 4 “AA” batteries to maintain alarm operation. -
Page 4: Using Ip16
NOTE: The iPhone is constantly updated to current time via cell phone towers. The time on your iPod is only accurate to the last time it was synced to a computer. It’s possible to have up to 59 seconds difference between the iP16 and synced iPhone/iPod. -
Page 5: Alarm Operation
When the iP16 is off or while listening to your iPhone/iPod, press the Sleep Button located on the back of the unit to enter sleep mode. The Sleep Icon will appear on the display to indicate it is in sleep mode. Sleep mode has a Gentle Sleep feature which gradually lowers the volume before it shuts off. -
Page 6: A Consumer Guide To Product Safety
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 7: Warranty Information
Solución iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of One Year from the date of original purchase.
Need help?
Do you have a question about the IP16 and is the answer not in the manual?
Questions and answers