Using Bluetooth: Pairing Your Device Manually - iHome iKN105 Instruction Manual

Pairing Your Device Manually
Pairing is the set-up process to introduce your Bluetooth-capable device to the K2. Once your
device is paired, the K2 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make
it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
2. Press the
auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow step 3
to begin pairing.
3. Press and hold the
Bluetooth Button will flash quickly, indicating the unit is in pairing mode.
4. "iHome Kineta K2" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected"
or similar message appears, select "iHome Kineta K2" to connect it. If prompted for a passcode, enter
"1234" on your device's keypad.
iHome Kineta K2
For iPhone
5. If pairing is successful, a tone will sound and the Bluetooth Button light will glow solid, indicating the K2
is ready to play music. There should also be an indication on your device. If no device is successfully
paired within 3 minutes the K2 will default to previous mode. Once the K2 is paired to a device, it will
attempt to autolink when the device is within range (about 30 feet).
Power Button to turn on the K2. The first time the unit is powered on, it will enter
Bluetooth Button for 2 seconds. The pairing sound will play and the
iHome Kineta K2
iHome Kineta K2
For other
15
K2
Using the
iHome Kineta K2