Presetting Stations - Roberts Blutune 40 Manual

Dab / dab+ / fm bluetooth digital radio
Table of Contents

Advertisement

Presetting stations

You may store your preferred DAB and FM radio stations to the preset
station memories. There are 20 memory presets in your radio, 10 for
DAB and 10 for FM. Presets are remembered by your radio in the event
of a power failure.
The procedure for setting presets and using them to tune stations is the
same for FM and DAB modes, and is described below.
1. Press and release the On/Off button to switch on the radio.
2. Repeatedly, press and hold the Mode button to select either the FM
or DAB mode.
3. Tune to the required station as previously described.
4. Press and release the Preset button. The display will show, for example,
'Empty 1' if no station has been stored to that preset.
5. Rotate the Tuning control to select the desired preset station number
under which you wish to store the station.
6. Press and hold the Tuning control until the display shows, for example,
'STORED'. The station will be stored under the chosen preset. Repeat
this procedure for the remaining presets.
7. Stations which have been stored in preset memories may be overwritten
by following the above procedure.
17
1
2
4
5,6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents