Roberts Blutune 40 Manual page 25

8. Press and release the Tuning control to enter the hour setting. The
alarm minute digits will fl ash on the display.
9. Rotate the Tuning control to choose the desired alarm minute.
10. Press and release the Tuning control to enter the minutes setting.
The alarm day option will fl ash on the display.
• If your radio has been set to use the 12 hour clock format there will
be an option here to set either AM or PM.
11. Rotate the Tuning control to choose the desired alarm day option:
Once - Will sound at one time only
Weekends - Will sound only on weekends
Weekdays - Will sound only on weekdays
Daily - Will sound everyday
• If setting the alarm to once only, continue with step 12 below. Otherwise
skip to step 18 on the following page.
12. Press and release the Tuning control to enter the setting. The alarm
day will fl ash on the display.
13. Rotate the Tuning control to choose the alarm day.
14. Press and release the Tuning control to enter the alarm day setting.
The alarm month will fl ash on the display.
15. Rotate the Tuning control to choose the alarm month.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
8-15
24