NEC DS1000 Feature Handbook page 88

Speed Dial
To program a System Speed Dial number:
1. Press
Press
2. Dial the system bin number (normally 200-299).
3. Press
4. Enter the line number you want the system to use when
dialing your stored number (e.g., 1 for line 1).
Enter the line group number you want the system to use
when dialing your stored number (e.g., 90 for group 0).
Press
5. Press
6. Enter the number you want to store (up to 16 digits long).
7. Press
8. Enter a name for the Speed Dial number.
9. Press
82
Normally, only attendants and supervisors can
store System Speed Dial numbers. Find out from
your Communications Manager if you can.
and dial
OR
PGM SPD
+
.
OR
OR
if you want to enter Intercom codes.
.
You can enter any combination of the digits 0-9, #
and *. To insert a pause in your Speed Dial number,
press . To insert a Flash in your Speed Dial
MIC
number, press
FLASH
.
See Entering Speed Dial names for more.
.
.
.
. These entries count as digits.