Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electric shock.
1.
Unplug air conditioner or disconnect power.
2.
Remove filter frame assembly and filter,
(see figures 1 and 2.
Filter Frame Assembly
Figure 1
Filter Assembly
Figure 2
Component Access
Removing the Front Panel
4-2
3.
Remove the (2) screws (one on each side)
of the front panel, (see figure 3).
Screws (one on each side)
Figure 3
4.
Push out and pull the tabs toward the front on
each side to release the panel. Then pull
upward, (see figures 4 and 5).
Tabs (on both sides)
Figure 4
Figure 5