Unlock The Door; Lock The Door; Low Battery Indication - Mul-t-lock Entr User Manual

6.5 Unlock the door

OPTION 1:
Place finger on fingerprint scanner.
Short beep emitted & white LED is on.
Swipe finger over fingerprint scanner
Fingerprint authorized: Blue LED blinking
and unlock command is sent.
Fingerprint not authorized: Red LED is ON.
The device goes to standby.
Note: In case ENTR™ lock hasn't succeed to unlock the door, unlock failed
message appear on the screen.

6.6 Lock the door

Touch the Fingerprint Touchpad
Press [#] [1]

6.7 Low battery indication

Warning signal blinking
Fingerprint Reader low battery indication
Red LED illuminate for 1s after wake-up
2 long beeps emitted
BATTERY LOW
ENTR™ User Manual
OPTION 2:
Touch the Fingerprint Touchpad
Screen shows user code
[OK]
Enter your code
Door Unit low battery indication
Low battery: Red LED illuminate for 1s after
wake-up
Extremely low battery:
Red LED illuminate for 1s after wake-up
2 long beeps emitted
USER CODE
23:49 03/01
FAILED
UNLOCK
BATTERY LOW
Page 23