Mul-t-lock Entr User Manual page 22

Setting a Master User require both fingerprint & code. It is possible to add up to two Master Users. it is
possible to add up to two master users.
Note: At any stage press and hold the [ * ] key to move to standby state
6. Add Master
Type in [Master name] [OK]
MASTERNAME
JOHN
MASTER #01
JOHN
• Hang the reader on the base plate.
• Tighten fixing screw.
Page 22
7. Set finger
Blue LED illuminates
ADD USER
SET FINGER
Press [OK]
Green LED blinking
SWIPE
1 st FINGER
Swipe 1st finger several times
over fingerprint scanner until two
confirmation beeps emitted
SUCCESS
1 st FINGER
Green LED blinking
SWIPE
2 nd FINGER
Swipe 2nd finger several times
over fingerprint scanner until two
confirmation beeps emitted
SUCCESS
2 nd FINGER
8. Set PIN code
Press [OK]
Type in [PIN code] (4 to 10 digits)
Retype [PIN code] (4 to 10 digits)
Matched codes Mismatched codes
SUCCESS
SET CODE
Fixing screw
ENTR™ User Manual
ADD USER
SET CODE
ENTER CODE
ENTER CODE
******
4-10 digits
RETYPE CODE
******
4-10 digits
FAILED
INVALID