Overheat (Oh)/Fan Fail/Pwr Fail/Uid Led; Power Fail Led - Supermicro X10DRi User Manual

X10DRi/X10DRi-T Motherboard User's Manual
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7
and 8 of Front Control Panel to use
the Overheat/Fan Fail/Power Fail
and UID LED connections. The Red
LED on pin 8 provides warnings of
overheating, fan failure or power
failure. The blue LED on pin 7 works
as the front panel UID LED indicator.
Refer to the table on the right for pin
definitions.

Power Fail LED

The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
definitions.
BMC
LAN CTRL
LEDM1
BIOS
X10DRi-(T)
Rev. 1.02
T-SGPIO1
T-SGPIO2
T-SGPIO3
J23
Battery
Intel PCH
SP1
JSD2 JOH1
JSD1
I-SATA0
UID
USB6/7(3.0)
USB0/1 (2.0)
COM1
JUIDB1 VGA
Fan5
IPMI_LAN
LAN1
LAN2
CLOSE 1st
CPU2
OPEN 1st
CLOSE 1st
CPU1
OPEN 1st
2-24
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Definitions (JF1)
Pin# Definition
7 Blue_UID LED
8 OH/Fan Fail/Power Fail
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State
Off
On
Flashing
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
A. OH/Fail/PWR Fail LED
B. PWR Supply Fail
20
Ground
X
FP PWRLED
HDD LED
NIC1 Link LED
NIC2 Link LED
OH/Fan Fail/
A
PWR Fail LED)
B
Power Fail LED
Ground
Ground
2
Definition
Normal
Overheat
Fan Fail
19
NMI
X
3.3 V
UID Switch
NIC1 Activity LED
NIC2 Activity LED
UID LED
3.3V
Reset
Reset Button
Power Button
PWR
1