Motherboard Features - Supermicro X10DRi User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
•
Dual Intel E5-2600v3 Series Processors (Socket
®
R3-LGA 2011); each processor supports dual full-
width Intel QuickPath Interconnect (QPI) links (of up
to 9.6 GT/s one direction per QPI)
•
Integrated memory controller supports: up to 1024 GB
of Load Reduced (LRDIMM) or 512 GB of Registered
(RDIMM) DDR4 (288-pin) ECC 2133/1866/1600 MHz
modules in 16 slots
Note 1: Memory speed support is dependent on
the processors used in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM sizes
•
DIMM up to 64GB @ 1.2V
•
Intel® PCH C612
•
Three (3) PCI Express 3.0 x8 slots (CPU1 Slot1/
CPU1 Slot3/CPU2 Slot5)
•
Three (3) PCI-Express 3.0 x16 slot (CPU1 Slot2/
CPU2 Slot4/CPU2 Slot6)
•
Graphics Controller via Aspeed 2400 BMC
•
Intel® i350 Gigabit (10/100/1000 Mb/s) Ethernet
Controller for LAN 1/LAN 2 ports (X10DRi),
•
Intel X540 10_Gigabit (T) Ethernet Controller for LAN
1/LAN 2 ports (X10DRi-T),
•
Aspeed 2400 Base-board Controller (BMC) supports
IPMI 2.0
SATA Connections
•
SATA Ports
•
RAID
IPMI 2.0
•
IPMI 2.0 supported by Aspeed 2400
1-7
Chapter 1: Overview
Six (6) SATA 3.0 Ports support-
ed by Intel® PCH (I-SATA 0-5),
Four (4) SATA 3.0 Ports support-
ed by Intel® PCH (S-SATA 0-3)
RAID 0, 1, 10, 5