Internal Speaker; Powered Sata Dom (Superdom) Connectors - Supermicro X10DRi User Manual

X10DRi/X10DRi-T Motherboard User's Manual

Internal Speaker

The Internal Speaker (SP1) can be used to
provide audible indications for various beep
codes. See the table on the right for pin defini-
tions. Refer to the layout below for the location
of the Internal Buzzer.
Powered SATA DOM (SuperDOM)
Connectors
Two powered SATADOM (Device-on-Module)
connectors are located at JSD1/JSD2 on
the motherboard. These connectors, colored
in yellow, are used with Supermicro Super-
DOMs, which have power-pins built in and do
not require separate external power cables.
These connectors are also back-compatible
with non-Supermicro SATADOMs that require
external power.
BMC
LEDM1
BIOS
X10DRi-(T)
Rev. 1.02
T-SGPIO1
T-SGPIO2
T-SGPIO3
J23
Battery
Intel PCH
A
SP1
C
B
JSD2
JOH1
JSD1
I-SATA0
UID
JUIDB1 VGA
LAN CTRL
Fan5
LAN2
CLOSE 1st
CPU1
2-28
Pin#
Pin 1
Pin 2
SuperDOM Connector
Pin#
1
2
3
USB6/7(3.0)
USB0/1 (2.0)
COM1
IPMI_LAN
LAN1
CLOSE 1st
CPU2
OPEN 1st
OPEN 1st
Internal Buzzer
Pin Definition
Definitions
Pos. (+) Beep In
Neg. (-) Alarm
Speaker
Pin Definitions
Definition
+5V
Ground
Ground
A. Internal Speaker
(Buzzer)
B. SATA DOM PWR
(JSD1)
C. SATA DOM PWR
(JSD2)