Supermicro X10DRi User Manual page 13

Jumper
Description
JBT1
Clear CMOS/Reset BIOS Configuration
JI C1/JI C2
2 2 SMB to PCI-E Slots
JPB1 BMC Enable
JPG1 VGA Enable
JPL1 GLAN1/GLAN2 Enable (X10DRi)
(10G) TLAN1/TLAN2 Enable (X10DRi-T)
JPME2 Manufacture (ME) Mode Select
JWD1 Watch Dog Timer Enable
Connectors
Battery
COM1/COM2
Fan1-6, FanA-B
J24
JD1
JF1
JIPMB1
JL1
JOH1
JPI C1
2
JPWR1/2
JSD1/JSD2
JSTBY1
JTPM1
JUIDB1
LAN1/LAN2
(IPMI) LAN
(I-)SATA 0-5
(S-)SATA 0-3
(CPU1) Slot1
(CPU1) Slot2
(CPU1) Slot3
X10DRi/X10DRi-T Jumpers
X10DRi/X10DRi-T Connectors
Description
Onboard CMOS Battery (See Chpt. 3 for Used Battery Dis-
posal)
Backplane COM Port1/Front Accessible COM2 Header
CPU/System Fan Headers
24-pin ATX Main Power Connector (See Warning on Pg. 1-6.)
Speaker/Power LED
Front Panel Control Header
4-pin External BMC I
Chassis Intrusion
Overheat LED Indicator
Power Supply SMBbus I
12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
SATA DOM (Device on Module) Power Connectors
Standby Power Connector
TPM (Trusted Platform Module)/Port 80 Header
UID (Unit Identification) Button
G-bit Ethernet (GLAN) Ports 1/2 (X10DRi)
10G-bit Ethernet (TLAN) Ports 1/2 (X10DRi-T)
IPMI_Dedicated LAN support by the Aspeed controller
SATA 3.0 Connectors supported by Intel PCH (I-SATA 0-5),
(I-SATA4/I-SATA5: used w/Supermicro SuperDOMs (Devices-
on-Module with built-in power pins)
SATA 3.0 Connectors supported by Intel PCH (S-SATA 0-3)
PCI-Express 3.0 x8 Slot from CPU1
PCI-Express 3.0 x16 Slot from CPU1
PCI-Express 3.0 x8 Slot from CPU1
1-5
Default Setting
See Chapter 3
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
C Header (for an IPMI Card)
2
C Header
2
Chapter 1: Overview