Supermicro X10DRi User Manual page 17

System
Management
Dimensions
Note 1: CPU Maximum Thermal Design Power (TDP) is subject to chassis
and heatsink cooling restrictions. For proper thermal management, please
check the chassis and heatsink specifications for proper CPU TDP sizing.
Note 2: For IPMI Configuration Instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
•
Dual Cooling Zone
•
Low noise fan speed control
•
Pulse Width Modulation (PWM) fan control
•
PECI (Platform Environment Configuration Interface)
2.0 support
•
UID (Unit Identification)/Remote UID
•
System resource alert via SuperDoctor® 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis Intrusion Header and Detection
•
12.07" (L) x 13.05" (W) (306.58 mm x 331.47 mm)
1-9
Chapter 1: Overview