Operations; Filling Clean Water Tank - Bissell PROHEAT 2X REVOLUTION 1548 Series User Manual

Filling Your Clean Water Tank:
formula
If you're not using a formula with a yellow easy fill cap, please refer to
filling instructions on page 10.
1
3
Unscrew the cap from
the clean water tank.
Add hot tap water to
the water fill line. Twist
cap back into place.
A few notes about filling the clean water tank:
• Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER
OR TANK IN MICROWAVE.
• When using BISSELL Deep Clean + Antibacterial formula: Only fill your
clean water tank with the recommended amount of water and formula to
achieve anti-bacterial benefits.
ATTENTION
Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs.
Stalling the brush may result in premature belt failure.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
The clean water tank is at the
top of the machine.
4
Firmly insert the formula
bottle into the color coded
cap on the clean water tank.
To add formula, simply
squeeze until formula
reaches the EasyFill line.
2
Lift the clean water tank
straight up to remove from
the machine.
5
At the bottom of the upper
handle, align the clean water
tank with the grooves and
slide the tank into place.
www.BISSELL.com
9