Bissell POWERFRESH 1544A Manual

USAGE

Attaching Mop Pad

To attach the mop pad, first make sure the unit is off and the water tank is empty. Then wrap the mop pad around the foot making sure the mop pad tag (square foot pads only) is on the back of the unit.

Filling Water Tank

The water tank is located on the side of the POD. To fill, flip open the water tank cover and fill using the included water cup.

Digital Steam Controls

Digital controls are located on top of start/stop the steam and select your the Steam POD. Use these controls to desired steam level.
When the ready light is lit, press the "ON/OFF" button once, then your desired steam level to start using the steam mop To turn your unit off, press the "ON/OFF" button.

Settings include:
(HI) High Steam
(LO) Low Steam

Using the LiftOFF POD

To use the LiftOFF POD, press the "LiftOFF Steam" button and pull the pod away from the body.

Wait 10 seconds after turning off the unit before removing the POD.
To start cleaning with the POD, first connect the "tool connector" onto the front of the pod. Then press "On/OFF" and select your seteam level. To turn your POD off press the "On/OFF" button again.