Cleaning Carpet; Deep Clean And Express Modes; Cleaning Mode - Bissell PROHEAT 2X REVOLUTION 1548 Series User Manual

Cleaning Your Carpet
1
Plug into a properly
grounded outlet.
4
Deep Clean Mode:
1. Press the spray trigger
to apply solution while
making 2 slow wet passes -
1 forward and 1 back.
2. Release the trigger.
3. Make 2 slow dry passes -
1 forward and 1 back, to
suck up the dirty solution.
(Do not hold down the
trigger for this step.)
NOTE: For best cleaning
performance, clean with
your machine in Deep
Clean Mode.
ATTENTION: To prevent damage to Berber carpets, avoid repeated strokes in
the same area.
2
Select
cleaning
mode:
Deep Clean
Delivers a deep
clean to your
carpet.
Express Clean
Provides a lighter
clean with about
1 hour of dry time.
*Choose "Deep
Clean" mode and use BISSELL
Deep Clean + Antibacterial to
deliver antibacterial benefits.
Deep Clean Mode:
When using BISSELL
Deep Clean +
Antibacterial Formula
1. Press the spray trigger
to apply solution while
making 3 slow wet passes
- 1 forward, 1 back, and 1
forward again.
2. Release the trigger.
3. Make 1 slow dry pass
back, to suck up the dirty
solution. (Do not hold down
the trigger for this step.)
3
Press the power button
to turn the machine on.
To recline your machine
for use, press the recline
pedal with your foot.
Express Clean Mode:
1. Press the spray trigger to
apply solution while making
2 wet passes - 1 forward
and 1 back.
2. Release the trigger.
3. Make 2 dry passes -
1 forward, 1 back to suck
up the dirty solution.
(Do not hold down the
trigger for this step.)
NOTE: In Express Clean
Mode, the dirty tank
will not get as full as
when cleaning with Deep
Clean Mode.
www.BISSELL.com
11