Troubleshooting - Bissell PROHEAT 2X REVOLUTION 1548 Series User Manual

Troubleshooting

WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
Problem
Reduced
spray OR
no spray
Loss of
suction
power
www.BISSELL.com
18
Possible causes
Clean water tank may be empty
Clean water tank may not be
seated completely
Tanks may not be seated properly
Dirty tank has picked up
maximum amount of dirty water
and has reached full line
Clean water tank is empty
Rubber tab on dirty water tank is
not sealed tight
Accessory Hose Door may not be
closed tightly in place
Nozzle may be clogged from pet
hair or debris
Remedies
Refill tank
Turn power OFF; remove and
reseat tank
Pick up both tanks and reseat them
so they fit properly on the unit
Empty dirty tank
Check fluid levels in the clean water
tank. Refill the tank if it is empty
Check the rubber tab on the dirty
water tank and press firmly on all
edges to secure it tightly (see step
4 on page 14 for detail)
Check the Accessory Hose Door
and make sure it is closed tightly –
it should be locked into place
Use the nozzle clean out tool
and follow steps on page 15 for
"Cleaning Nozzle"