Bissell Lift-Off, 94Y2 / 27F6 / 35K3 / 73H5 Series Manual

Bissell Lift-Off, 94Y2 / 27F6 / 35K3 / 73H5 Series Manual

Also See for Lift-Off:

Advertisement

Bissell Lift-Off, 94Y2 / 27F6 / 35K3 / 73H5 Series Manual

Introduction

We're glad you purchased a BISSELLdeep cleaner. Everything we know about floor care went into the innovative design and construction of this complete, high-tech home cleaning system.
Your BISSELLdeep cleaner is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you'll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELLis a global leader in the design, manufacture, and service of high quality homecare products like your BISSELLdeep cleaner.

DETACHABLE INNOVATION
Complete Line of BISSELLLift-Off ® Products


For more information visit www.bissell.com

Product view

Product view - Part 1
Product view - Part 2

to reduce the risk of fire and electric shock due to internal component damage, use only BISSELLcleaning fluids intended for use with the deep cleaner.

Cleaning fluid
Keep plenty of genuine BISSELL2X formula on hand so you can clean and protect whenever it fits your schedule. always use genuine BISSELLdeep cleaning formulas. non-bissell cleaning solutions may harm the machine and will void the warranty.

BISSELL2X Professional deep cleaning formula with scotchgard ™ Protection BISSELL2X fiber cleansing formula with scotchgard ™ Protection BISSELL2X Pet stain and odor formula with scotchgard ™ Protection BISSELL2X allergen cleansing formula BISSELL2X natural orange formula BISSELL2X lavender essence formula BISSELLtough stain Precleaner

Assembly

Your deep cleaner comes in two easy to assemble components:

  1. upper handle
  2. Portable spot cleaner/base

The only tool you will need to assemble your cleaner is a Phillips screwdriver.

  1. slide the upper handle onto the body of the machine by guiding the 2 posts on the body into the opening on the upper handle.
  2. firmly holding the upper handle in place, screw 2 screws into the marked holes at an upward angle above the support handle.
  3. at an upward angle, screw the remaining 2 screws into the marked outermost holes under the support handle.
  4. Wrap power cord around Quick Release cord Wrap.
  5. Wrap flex hose around the hose wrap and secure with hose secure latch.
  6. align the product as image 4 shows and firmly push down the portable spot cleaner until it is secured on both sides.
  7. check latches on both sides to confirm it is secured (5).
  8. snap attachment(s) into the back of unit.
    NOTE: Portable spot cleaner must be fully secure to operate in the upright mode.
    To further check if the portable spot cleaner is secure, plug in and turn on to verify that the heat indicator light is illuminated. If the heat indicator light does not illuminate, release the pod and re-secure by pushing firmly until both sides snap into place.


do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operating procedures.

Operations

Special features
Innovative cleaning technology
This innovative deep cleaner offers two machines in one. The upright deep cleaner uses the power of heat, brushes and cleaning formula to get deep down dirt for a maximum clean. The portable spot cleaner detaches to clean tough spots and stains and hard to reach areas.

Hot water heater
This deep cleaner features a patented built-in hot water heater which will heat the hot tap water you put in to safely optimize cleaning effectiveness. The heater temperature is limited to prevent carpet damage. The heater automatically turns on when you turn the machine on. This operates only in upright cleaning mode.
Tip: for easy carrying, grab the carry handle portable spot cleaner and balance with the handle on the back of the machine.

Scotchgard™ Protector
Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELLoffers deep cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.
To maintain your Scotchgard 5-year limited stain warranty, you do not need to hire a professional. By using your BISSELLdeep cleaner with BISSELL2X formulas containing Scotchgard protector every 12 months, your carpet warranty from 3M remains in effect. No other home deep cleaning system can do this for you. Refer to the Scotchgard Protector warranty for details.

Before you clean
warningATTENTION: some berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition.

  1. move furniture to another area if cleaning an entire room (optional).
  2. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.
  3. Pretreating (optional):
    1. Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryway and hallways.
    2. BISSELLTough Stain precleaner 3b. spray the BISSELLtough stain precleaner formula onto heavy traffic areas, soiled areas or stains. allow to penetrate for at least 3 minutes.
      Clean as normal, using the deep cleaner in upright mode, following the instructions below.

Upright cleaning mode
Filling formula & water tank

  1. Remove tank from the base of the machine by lifting up tank carry handle.
    Note: This tank was designed with a flat bottom so it can be easily filled.
  2. unscrew the black cap and remove bottle insert.
  3. fill tank with hot tap water to the water fill line. add two ounces of BISSELL2X formula to the tank.
  4. Replace the bottle insert in the tank and tighten the black cap. Replace the tank on the deep cleaner.

Cleaning

do not overwet. take care not to run over loose objects or edges of area rugs. stalling brush may result in premature belt failure.

  1. Plug into a proper outlet and press the power button. allow 1 minute for the hot water heater to warm-up before cleaning.
  2. While pressing the trigger, make one slow forward wet pass and another one back.
  3. Release the trigger and make one slow forward and backward pass over the same area. Repeated passes will help aid in dry time.
  4. continue passes until cleaning area is complete.
    Note: Your machine may be equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker.

Empty dirty tank
Tip: make only one trip to the sink by removing the entire portable cleaner. fill and empty in the same trip.

  1. When the dirty tank reaches the "FULL" line on the tank it is time to empty.
  2. Remove dirty tank and carry to a utility sink, toilet or outside (where you will dispose of the dirty water).
  3. to unlock the dirty tank lid, rotate handle over the back of the tank. Remove lid and pour out dirty water. Rinse out dirty tank to remove any debris.
  4. Replace top of tank, and rotate the handle forward to lock in place on front of tank.
  5. before replacing tank on machine, wipe debris from red filter

Cleaning your machine

to reduce the risk of fire, electric shock, or injury, turn power off and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
Tip: for best results empty, rinse and dry both tanks before storing.

  1. flush out machine of any remaining residual solution. fill the formula & water tank with hot tap water and turn on your machine. Recline handle and press the spray trigger for about 15 seconds while making forward and backward passes on carpet. continue without pressing the trigger until there is no more water being suctioned up. turn off the machine and wrap the powercord. make sure the dirty tank and the formula & water tank are emptied, rinsed, and dried before the next use. before you replace tank, clean all debris from red filter screen.
  1. Rinse front nozzle of any dirt and debris. Remove portable spot cleaner from the base of the machine. unscrew three screws with Phillips screw driver and remove nozzle. Rinse nozzle out at the faucet. Place back onto the machine by hooking the tabs into the holes on the bottom sides of the machine. secure with screws.
    Cleaning your machine
  2. the inside of the end caps can be wiped out with a clean paper towel, or for a more thorough clean, the end caps can be taken off and rinsed clean.
  3. any loose hair or debris can be pulled from the brush rolls and thrown away. for a more thorough clean, follow directions for removal of brush rolls. your machine is now ready to be stored.
    Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.


to reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

Portable spot cleaning mode
Preparing the machine

  1. step on the portable spot cleaning pedal to release the portable spot cleaner.
  2. Release flex hose by twisting the hose secure latch clockwise. unwrap flex hose completely.
  3. attach the desired tool to the hose grip until it snaps together. make certain the tool is securely attached.
  4. twist the Quick Release cord wrap clockwise to unwrap the power cord completely and plug into grounded outlet.

Filling tank

  1. follow the instructions for filling the tank in the upright cleaning mode section.

Cleaning with Tools:

If using to clean upholstery, check upholstery tags. Check manufacturer's tag before cleaning. "W" or "WS" on the tag means you can use your Lift off Deep Cleaner if the tag is coded with an "X" or an "S"(with a diagonal stripe through it), or says "Dry Clean Only", do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer's tag is missing or not coded, check with your furniture dealer.")

Check for colorfastness in an inconspicuous place. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric

  1. hold the tool approximately 1" above the soiled surface. Press the spray trigger to apply the cleaning solution to the soiled area.
    Note: Hold end of hose below the tank water level to help prime the portable spot cleaner.
  2. using the brush on the tool, gently scrub the area to be cleaned.
  3. apply downward pressure on the tool and pull it toward you. the suction will remove the dirt and cleaning solution. continue until no more dirt can be removed.

Cleaning with Deep Reach™ Tool

  1. set tool on soiled surfaces and press the trigger to spray solution onto the soiled area to be cleaned.
  2. slowly move the tool back and forth over the soiled surface, keeping the tool in contact with the carpet.
  3. Release trigger and move tool slowly over the soiled area to suction up water and dirt.
  4. continue to clean the area, working in small sections, until no more dirt can be removed.

Empty dirty tank
Follow the instructions under Empty dirty tank section of the Upright cleaning mode section.
Replacing portable machine on base

  1. align the product as the graphic shows, with the cord side on the left and hose side on the right.
    Replacing portable machine on base
  2. Push down the portable spot cleaner until you hear it click securely into place. test the fit by pulling up on the carry handle to make sure it is secure.

Cleaning portable machine

  1. Remove and rinse the tools in clean, running water. dry and replace in the tool storage provided.
  2. it is recommended that you suction clean water from a bowl to rinse out the hose. then lift end of hose and stretch out to ensure all water is cleared from hose.
  3. coil flex hose around the hose wrap and secure with latch.
  4. check suction gate and if it appears dirty, follow steps 1-4 under cleaning suction gate.

Maintenance and care

Machine care (check regularly)
Cleaning suction gate The suction gate automatically diverts air when the portable deep cleaner is detached. This should be checked and cleaned regularly for any dirt and debris.

to reduce the risk of fire, electric shock, or injury, turn power off and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

  1. step on the pedal and remove the portable spot cleaner. Remove dirty tank.
  2. Remove two screws and pull off suction gate door.
  3. Wipe suction gate clean and rinse suction gate door.
  4. Replace suction gate door and two screws.

Cleaning spray tips

  1. step on the pedal and remove the portable spot cleaner. to remove, push in tab and pull it out.
  2. clean by rinsing under hot water.
  3. Replace by snapping back in.
  4. Repeat steps on second spray tip.

Cleaning solution filter

  1. step on the pedal and remove the portable spot cleaner. Remove the red solution filter cap on the base of the machine by inserting a coin or a flat head screw driver into the slot on the top.
  2. turn counter clockwise to unscrew. set aside.
    Cleaning solution filter
  3. Remove the white filter by the post. Rinse the filter under water.
  4. Replace the white filter back into the filter area.
    Note: make sure the white filter is seated properly before replacing the red solution filter cap.
  5. Replace the red solution filter cap and turn clockwise to tighten.

Small belt removal and replacement (as needed)
Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below.

to reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.

  1. turn off the machine, and unplug it from the outlet. Remove portable spot cleaner.
  2. Remove the nozzle by unscrewing three screws on the nozzle cover.
  3. turn the machine on its side.

    with portable spot cleaning pedal facing down.
  4. Remove end cap by unscrewing the 3 screws. take care not to drop the screws into the unit.
  5. Remove 1 silver screw from the pivot arm.
  6. Remove pivot arm by gently lifting up.
  7. Remove small brush belt.
  8. Replace small brush belt, and reverse steps above.
  9. manually rotate brushes by hand to make sure they move freely. may notice a slight resistance from the motor.

Brush removal and large belt replacement (as needed)
Brushes can be removed for cleaning or replacement as needed.

to reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.

  1. follow small belt removal instructions items 1-7.
  2. Remove brush rolls by pulling them off of the metal rods. Be careful not to lose the small washer at each end of the brush rolls.
  3. Re-attach the large belt to the grooves on the end of the new brush rolls. if the belt is damaged, replace with a new belt.
  4. Place cleaned or new brush rolls back onto the rods. make sure one washer is on each end of the rollers prior to sliding onto the rod. be sure the brush is seated completely on the rod.
  5. Replace small belt over grooves in back roller and metal cog.
  6. Replace pivot arm and secure with silver screw.
  7. Re-attach end cap by tightening with the (3) black screws.
  8. Return front nozzle to front of unit, by latching from underneath and then securing with 3 screws.
  9. follow step number 8 & 9.
    if you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call BISSELLConsumer Services.

Troubleshooting

Built-in heater ready light does not illuminate

Possible causes Remedies
  1. The power is not turned ON
  2. The portable spot cleaner is not attached completely
  1. The power must be ON to activate the heater ready light
  2. Make sure the portable spot cleaner is attached Push down firmly to check

Reduced Spray or No Spray

Possible causes Remedies
  1. Formula & water tank may be empty
  2. Formula & water tank may not be seated completely
  3. Pump may have lost prime in portable spot cleaning mode
  4. The portable spot cleaner is not attached completely
  5. Solution filter may be clogged
  1. Refill tank
  2. Turn power OFF. Remove and reseat tank
  3. Hold end of hose below water level in tank to prime
  4. Push down firmly to check connection
  5. Follow steps under cleaning filter

DirtLifter® PowerBrush does not turn

Possible causes Remedies
  1. The portable spot cleaner is not attached completely
  2. The unit is in the upright position
  3. Circuit breaker on machine (if equipped) may have tripped
  4. The belt is off or broken
  1. Make sure the portable spot cleaner is attached. Push down firmly to check
  2. Brushes only rotate when unit is reclined using the recline pedal
  3. Turn the machine OFF and unplug from outlet. Check to see if foreign object is caught in brush roll. Remove object. Plug machine in to reset circuit breaker
  4. Turn power OFF and unplug unit from outlet.

Loss of suction power

Possible causes Remedies
  1. Tanks may not be seated properly
  2. Nozzles may not be assembled properly
  3. The portable spot cleaner is not attached completely
  4. Dirty tank has picked up maximum amount of dirty water and has reached full line
  5. Formula & water tank is empty
  6. Suction Gate is open.
  1. Pick up both tanks and reseat them so it they fit snugly on the unit
  2. Unplug the unit. Check to make sure the "lip" of the nozzle is securely hooked into the groove on bottom of Tank
  3. Make sure the portable spot cleaner is attached. Push down firmly to check
  4. Empty dirty tank
  5. Check fluid levels in formula & water tank
  6. Check to make sure the suction gate is closed. Follow "Cleaning Suction Gate" instructions.

Other maintenance or service not included in the manual should be performed by an authorized service representative.
Please do not return this product to the store.
For any questions or concerns, BISSELLis happy to be of service. Contact us directly at 1-800-237-7691.

Accessories - BISSELLdeep cleaner


*not all parts are included with every model.

Item Part No. Part Name
1 203-6651 3" tough stain tool
2 203-6652 Powered turbobrush ® hand tool
3 203-6653 4" upholstery tool
4 203-6654 6" stair tool
5 203-7885 spraying crevice tool
6 203-7412 deep Reach Pet tool
7 62e5-2 2X fiber cleansing formula with scotchgard ™ Protection 60 oz. 2X Pet stain and odor formula with scotchgard Protection 60 oz.
8 99K5-2 2X Pet stain and odor formula with scotchgard ™ Protection 60 oz.
9 89Q5-2 2X allergen cleansing formula 60 oz.
10 83P3-2 2X natural orange formula 60 oz.
11 34b5-2 2X lavender essence formula 60 oz.
12 78h6-3 2X Professional deep cleaning formula with scotchgard ™ Protection 48 oz.
13 26V2 2X spring breeze formula 60oz.
14 0790 Pet stain and odor Remover ™ 16 oz.
15 4001 tough stain Precleaner 22 oz.
16 310-3040 mesh bag

Replacement parts – BISSELLdeep cleaner

Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.

*Not all parts are included with every model.

Item Part No. Part Name
1 203-7893 formula & Water tank assembly (includes cap and insert)
2 203-6675 cap and insert for formula & Water tank
3 203-7894 dirty tank assembly (includes entire tank)
4 203-7904 cord Wrap
5 203-7896 end caps with edge brushes (2 pack, includes screws)
6 203-7897 spray tips assembly (includes two spray tips)
7 203-7898 in-line filter assembly (includes cap and filter)
8 203-7901 nozzle gasket
9 203-7906 nozzle cover assembly (includes gasket, nozzle cover, and front nozzle cover)
10 203-7907 front nozzle
11 203-7915 brush assembly (includes 2 brush rolls, 2 axles, and 2 swivel arms)
12 203-7916 brush single Pack (includes 1 brush roll, and 1 axle)
13 203-7900 small brush belt
14 203-7899 large brush belt
15 203-6689 hose secure latch
16 203-7918 dirty tank gasket assembly (include both gaskets )
17 203-7917 diverter cover assembly (includes cover and screws)

Don't forget to register your product!
Registering is quick, easy and offers you benefits over the lifetime of your product. you'll receive:
BISSELL Rewards Points
automatically earn points for discounts and free shipping on future purchases.
Faster Service
supplying your information now saves you time should you need to contact us with questions regarding your product.
Product Support Reminders and Alerts
We'll contact you with any important product maintenance reminders and alerts.
Special Promotions
optional: Register your email to receive notice of offers, contests, cleaning tips and more!
Visit www.BISSELL.com/registration now!

BISSELL consumer services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.BISSELL.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number:
Please record your Purchase Date:

NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim.
Visit our website at: www.BISSELL.com

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:
Read all instRuctions befoRe using youR deeP cleaneR.

To reduce the risk of fire, electric shock, or injury:

  • Do not immerse.
  • Use only on surfaces moistened by the cleaning process.
  • Always connect to a properly grounded outlet.
  • See Grounding Instructions.
  • Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
  • Do not leave machine when it is plugged in.
  • Do not service machine when it is plugged in.
  • Do not use with damaged cord or plug.
  • If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.
  • Do not expose to rain, store indoors.
  • Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.
  • Unplug by grasping the plug, not the cord.
  • Do not handle plug or appliance with wet hands.
  • Do not put any object into appliance openings, use with blocked opening, or restrict air flow.
  • Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.
  • Do not pick up hot or burning objects.
  • Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.
  • Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
  • Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.).
  • Do not modify the 3-prong grounded plug.
  • Do not allow to be used as a toy.
  • Do not use for any purpose other than described in this User's Guide.
  • Do not unplug by pulling on the cord.
  • Use only manufacturer's recommended attachments.
  • Use only cleaning products formulated by BISSELLfor use in this appliance to prevent internal component damage. See the cleaning fluid section of this guide.
  • Keep openings free of dust, lint, hair, etc.
  • Do not point attachment nozzle at people or animals
  • Keep appliance on a level surface.
  • Turn off all controls before unplugging.
  • Unplug before attaching the TurboBrush®.
  • Be extra careful when cleaning stairs.
  • Close attention is necessary when used by or near children.

SAVE THESE INSTRUCTIONS.
this model is foR household use only.

GROUNDING INSTRUCTIONS
this appliance must be connected to a grounded wiring system. if it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. the cord for this appliance has an equipment-grounding conductor and a grounding plug. it must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.


improper connection of the equipmentgrounding conductor can result in a risk of electrical shock. check with a qualified electrician or service person if you aren't sure if the outlet is properly grounded. do not modify the Plug. if it will not fit the outlet, have a proper outlet installed by a qualified electrician. this appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above. make certain that the appliance is connected to an outlet having the same configuration as the plug. no plug adapter should be used with this appliance.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Bissell Lift-Off, 94Y2 / 27F6 / 35K3 / 73H5 Series Manual

Advertisement

Need help?

Need help?

Do you have a question about the Lift-Off and is the answer not in the manual?

Questions and answers

Table of Contents