Dmx Linking; Configuration (Dmx); D-Fi Usb Connectivity; Configuration (D-Fi Usb) - Chauvet SlimPAR T6 USB User Manual

DMX Linking

Configuration
(DMX)
D-Fi USB
Connectivity
Configuration
(D-Fi USB)
D-Fi USB DIP Switch
Channels
Page 10 of 18
The SlimPAR T6 USB works with a DMX controller. Information about DMX is in the
CHAUVET® DMX Primer,
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
The SlimPAR T6 USB is able to become a D-Fi wireless receiver/transmitter with the use
of the D-Fi USB from Chauvet DJ. Simply set the product's DMX Personality and DMX
Address, set the DIP switch D-Fi receiving/transmitting channel, then plug it into the D-Fi
USB port.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing
so may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual
display control / menu buttons and IRC will be unavailable until you unplug the
D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
1. Set the DMX Personality and DMX address on your product.
2. Use the Chart provided to set BOTH:
· the Channel, and then
· the Receiving or Transmitting option.
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
RECEIVING
which is available from
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
TRANSMITTING
SlimPAR T6 USB User Manual Rev. 1
the Chauvet website