Release A Call And Start Another Call - Cisco 7811 User Manual

Basic Operations
Procedure
Step 1 Press New Call.
Step 2
Ensure the headset button is lit. If the headset button is not lit, press Headset
Step 3
Enter a number.

Release a Call and Start Another Call

When you are on an active call or dialing, and want to release the call, the following actions occur:
• The active call ends.
• The phone provides dial tone.
• You can dial the new call.
Procedure
Step 1 When you are on an active call, press End Call, or while dialing, press Cancel .
Step 2 Enter the required number and press Call.
Dial an International Number
Plus Dialing allows you to press and hold the star (*) key for at least 1 second to insert a plus (+) sign as the
first digit in a phone number for international dialing. The plus sign applies only for on-hook or off-hook
calling.
When you see phone numbers with the + sign in them, you can select and dial the entry without having to add
digits for international calls.
Procedure
Step 1 Press and hold star (*) for at least 1 second.
The plus (+) sign displays as the first digit in the phone number. The corresponding tone stops to indicate that
the * has changed to a + sign. You can only hear the tone in off-hook state.
Step 2
Dial the number.
Cisco IP Phone 7811, 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
Release a Call and Start Another Call
.
25