Product Specifications - Epson TM-L90 Developer's Manual

Confidential

Product Specifications

Print method
Print width
Cutting method
Cut type
Possible thickness
to be cut with a
manual cutter
Character sets
Interface
(compatible)
Buffer
D.K.D. function
Power Supply
Operating Voltage
Current
consumption
Temperature
Humidity
Weight (mass)
Note:
Install a paper exit guide which is packed in the box with the printer when the autocutter is used with a
full cut, positioning the printer horizontally. Since if the printer is installed horizontally without the
paper exit guide and the autocutter full cut is used, a cut sheet may be dropped in the paper path and it
may cause a double-cut, paper jam, or autocutter error. However, if the printer is installed vertically or if
the autocutter is used with a partial cut, the paper exit guide does not have to be used.
Rev. A
Thermal line, 8 dots/mm × 8 dots/mm (203 dpi × 203 dpi)
80mm (factory setting) or 38 to 70 mm can be set using a paper roll spacer
Separated cutter blade system
Users can choose from the following two types.
Ë Full cut (cuts paper completely) (default setting)
Ë Partial cut (one point left uncut) is also available as a dealer option.
(Set by changing the position of the autocutter unit.)
100 µm or less
95 alphanumeric, 37 international characters, 128 × 11 graphic
RS-232C / Bi-directional parallel
Dealer option: RS-485, USB, 10Base-T I/F
Receive buffer: 4KB/45bytes
User-defined buffer
Downloaded bit image: Approximately 12KB
User-defined characters: Approximately 11KB
Macro buffer: 2KB
Non-volatile graphics data buffer: 0 bytes through 384KB
User NV memory: 1KB through 192KB
Page mode area: 106KB
2 drives
Power supplied by AC adapter PS-170, PS-180 (option)
+24 VDC ± 7%
<High speed printing>
Approximately 1.7 A (Character font A α-N, capital letters,
36-character rolling pattern, 42-column printing)
<Standby>
Approximately 0.1 A
Operating: 5 to 45 °C {41 to 113 °F}
Storage: –10 to 50 °C {14 to 122 °F}
10 to 90%
Approximately 1.9 kg {4.19 lb}
(common for all models)
(for ANK/Multilingual model)
Approximately 15KB
(for Japanese model)
TM-L90 Developer's Guide
Product Overview 1-13