Confidential
Auto-setting Mode for Paper Layout
Auto-setting mode function of paper layout
This function is to measure the paper layout settings of the paper inserted automatically and
store them in the NV memory.
Starting the auto-setting mode
1. Open the cover
2. Turn the power on while holding down the FEED button (located inside the printer) until the
ERROR LED is on.
3. Stop pressing the FEED button (located inside the printer) when the ERROR LED is on.
4. Press the FEED button (located inside the printer) six times, and then close the cover.
Note:
If labels (with black marks) are used, the auto-setting mode for the paper layout may become error. To
prevent this, it is recommended to set the memory switch by command. Refer to Function 49 of the GS ( E
command for details.
Ending the auto-setting mode
Once the setting is performed, the auto-setting mode is ended.
3-14 Description of Functions
Rev. A