Epson TM-L90 Developer's Manual page 49

Hide thumbs Also See for TM-L90:
Table of Contents

Advertisement

Confidential
TM-L90 Developer's Guide
Note:
When you want to set the paper roll width from 61mm to 70mm, break off by hand the two tabs of the
spacer shown in the illustration below. (You can still also use widths from 38 mm to 60 mm with the
spacer with the tabs broken off.)
tabs
4. Insert the screw included with the spacer into the hole indicated below and tighten it. (Even
if you can see two holes, this is the only one to put the screw in.)
hole for screw
Rev. A
Setup 2-15

Advertisement

Table of Contents
loading

Table of Contents