Confidential
Appendix D
Connection of Cable and Option
Connecting Cables
All cables are connected to the connector panel located on the lower rear side of the printer.
Note:
The figure above shows the connector panel for RS-232/RS-485 interface model printer. The shape of the
interface connector varies according to the type of interface used.
Be sure to turn off the power supply for both the printer and the host computer unit before connecting the
various cables.
Connecting Host Computer
RS-232/RS-485 Interface Models
1. Press the connector on the end of the interface cable firmly onto the interface connector
located on the connector panel.
2. When using connectors equipped with screws, use the screws to tighten the connectors
firmly in place.
Rev. A
Drawer kick connector
Power supply connector
Connector Panel
Tightening Screws
Interface connector
Connection of Cable and Option D-1
TM-L90 Developer's Guide