Epson TM-L90 Developer's Manual page 133
Hide thumbs
Also See for TM-L90:
- Technical reference manual (212 pages) ,
- Service manual (148 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Confidential
4. Remove the bottom of the cover as shown in the illustration below.
5. Install the connector of the power supply cable onto the power supply connector (labeled
DC24V).
Power supply connector
Power Supply Connector
Note:
When removing the DC cable connector from the EPSON PS-170, PS-180, first confirm that the power
supply cable has been disconnected from the power supply unit; then grasp the arrow marked section of the
connector and pull straight out.
D-8 Connection of Cable and Option
Rev. A
Advertisement
Table of Contents
