Related Manuals for Telikou BK-2400
Summary of Contents for Telikou BK-2400
- Page 1 TELIKOU Intercom System ® BK-2400 Wireless Belt Pack Instruction Manual © 2006 TELIKOU Systems All Rights Reserved www.telikou.com...
- Page 2 BK-2400 is full two-way audio transmitter and receiver. It is suitable for stage communication, outside broadcast van, show, and other applications where wireless communication is required. Basic operation Power Switch Turn on or off BK-2400. When the belt pack is not using, please turn it off.
- Page 3 If no, the microphone is turned off. The MIC button need to be operated manually when ‘Vox On’ is set as OFF,. Dyn Mic This dipper is used to set microphone type. Set this dipper as ON, If BK-2400 uses dynamic...
- Page 4 Otherwise set it as OFF. The default is ON. 10. Battery BK-2400 uses 3 AA size batteries. The working time is no less than 5 hours. III. The operation between main station and belt pack Every belt pack has its own machine code. Main station need to memorize each belt pack’s code on corresponding channel to recognize each belt pack.
- Page 5 TELIKOU BK-2400 Wireless Belt Pack operation channels are done. IV. Technical Specification Radio Specifications General 1) RF Input/output Impedance is 50Ohms 2) RF 75CHs Frequency Hopping Spread Spectrum(FHSS) in RF Operation Frequency Band 3) Transmitting Modulation Data Rate is 576Kbps 4) Modulation is GFSK，BT=0.6...
Need help?
Do you have a question about the BK-2400 and is the answer not in the manual?
Questions and answers