Telikou BK-501 Instruction Manual

Belt pack

Advertisement

TELIKOU

Intercom System

BK-501 Belt Pack
Instruction Manual
©
2006 TELIKOU Systems
All Rights Reserved
TELIKOU
While
makes every attempt to maintain the accuracy of the information contained
in its product manuals, that information is subject to change without notice

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BK-501 and is the answer not in the manual?

Questions and answers

Summary of Contents for Telikou BK-501

  • Page 1: Intercom System

    TELIKOU Intercom System BK-501 Belt Pack Instruction Manual © 2006 TELIKOU Systems All Rights Reserved TELIKOU While makes every attempt to maintain the accuracy of the information contained in its product manuals, that information is subject to change without notice...
  • Page 2: Basic Operation

    TELIKOU BK-501 Belt Pack Introduction Thank you for choosing TELIKOU intercom product. BK-501 beltpack can work with any TELIKOU Intercom standard main station, and it is suitable for TV station, communication command center, outside broadcast van, show, project test field, and other applications where communication is required.
  • Page 3: Troubleshooting

    Mic LED indicator will be ON; when it is pressed again, the circuit will be turned off, and the Mic LED will be OFF. When the connection between BK-501 and any TELIKOU Intercom main station is established, the Remote-Mic-Kill button of the main station can turn off the microphone of the BK-501 remotely.
  • Page 4: Specifications

    Solution 3: Check headset cord Problem: Can not turn on the Mic function Cause 1: The connection among TELIKOU main stations must go via Online connector on rear panel. The Online connector of this station connected to the Intercom Line connector of another station.

Table of Contents