1. Manuals
  2. Brands
  3. Telikou Manuals
  4. Intercom System
  5. MS-200
  6. Instruction manual

Telikou MS-200 Instruction Manual

Main station
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TELIKOU
Intercom System
MS-200 Main Station
Instruction Manual
©
2006 TELIKOU Systems
All Rights Reserved
TELIKOU
While
makes every attempt to maintain the accuracy of the information contained in
its product manuals, that information is subject to change without notice

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS-200 and is the answer not in the manual?

Questions and answers

Related Manuals for Telikou MS-200

Summary of Contents for Telikou MS-200

  • Page 1 TELIKOU Intercom System MS-200 Main Station Instruction Manual © 2006 TELIKOU Systems All Rights Reserved TELIKOU While makes every attempt to maintain the accuracy of the information contained in its product manuals, that information is subject to change without notice...

  • Page 2: Basic Operations

    Thank you for choosing TELIKOU intercom product. The MS-200 two-channel main station is a powerful, yet user friendly unit that server as a heart of a TELIKOU intercom system. We recommend you read through this manual to better understand the function of MS-200. If you have any question that does not addressed on this manual, please contact your dealer or call us.

  • Page 3: Listen Level Control

    TELIKOU MS-200 Two Channel Main Station 2. Listen Level Control Turn this control to set the listen level of received audio signal within communication system. It adjusts listen level of headset and speaker. Turn the control completely counterclockwise to silence the channel.

  • Page 4: Speaker Switch

    The Speaker Switch turns the front panel speaker on or off. 11. Power LED This green LED lights on when the MS-200 is receiving AC power and the power switch on the rear panel is turned on. 12. Link (A+B) When this switch is set to the Off position.
  • Page 5 C) System Sidetone Adjustment Turn off all the microphones on sub-stations and belt packs. Followed by A) and B), adjust sidetone for MS-200 main station. Adjust sub-station and belt pack’s sidetone one by one to satisfied level. 15. Feed To LED This LED lights when Program Feed To function is set to ON or INT.

  • Page 6: Remote Mic Kill Switch

    TELIKOU MS-200 Two Channel Main Station 17. Call LED Each call LED corresponds to one channel. This LED will light under two cases: a) called: when the call signal from communication channel is received; b) call: if you want to call a channel, please turn on switch 2 corresponding to this channel, turn on call switch 4, and then the call LED for this channel will be lit.

  • Page 7: Power Switch

    TELIKOU main station are connected by Online Connector in the system, pressing RMK button on any main station kills all the MIC of belt packs. All the TELIKOU main stations are can be connected by Intercom Line Connector as well. But under this condition, pressing RMK button on any main station will not affect other belt packs which are not directly connect to this main station.

  • Page 8: Program Input

    IV. Installation and cable 1. Installation MS-200 main workstation adopts 19-inches 1U cabinet, and this workstation can be mounted on rack or placed on desktop. If it is placed on desktop, it is required to adhere 4 rubber foot pads provided with machine to four corners at the bottom of cabinet with double-face adhesive tape.

  • Page 9: Troubleshooting

    V Troubleshooting Problem: Power LED wink Cause 1: Direct short on the intercom channel Solution 1: Remove all the intercom cables from MS-200. Check each channel one by one, until find the short channel. Cause 2: Overload Solution 2: Decrease the amount of remote stations.
  • Page 10 Problem: Can not turn on the Mic function on all the beltpacks Cause 1: The connection among TELIKOU main stations must go via Online connector on rear panel. The Online connector of this station connected to the Intercom Line connector of another station.
  • Page 11 Problem: Can not turn off the Mic function on all the beltpacks after pressing RMK button Cause 1: The connection among TELIKOU mains stations must go via Online connector. If main stations are connected by Intercom Line connector, RMK function will not work properly.
  • Page 12 STATION CAPACITY: 17 beltpacks ENVIRONMENTAL: 0° - 50°C（32°-122°F） DIMENSION: 19” (W) x1.75” (H) x9.48” (D), 482mm x 44.5mm x 241mm WEIGHT: 2.6kg Notice While TELIKOU makes every attempt to change its product manuals, that information is subject to change without notice.

Table of Contents