care and cleaning
Always switch off, unplug and
G
dismantle before cleaning.
Empty the goblet before unscrewing
G
it from the blade unit.
Don't immerse the blade unit in
G
water.
Do not place any parts in the
G
dishwasher.
power unit
Wipe with a damp cloth, then dry.
G
Don't immerse the power unit in
G
water.
Store excess cord in the storage
G
area at the back of the power
unit
.
blade assemblies
blender and multi mill
Remove the blade unit from the
G
goblet or mill by turning to the
unlock position
grinding and grating mills
Remove the blade unit from the jar
G
by turning in a clockwise direction.
1 blender/multi mill: remove and
wash the sealing ring.
2 Don't touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don't immerse the
blade unit in water.
3 Leave to dry upside down.
other parts
Wash by hand, then dry.
to release.
service and customer
care
If the cord is damaged it must, for
G
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
UK
If you need help with:
using your appliance or
G
servicing, spare parts or repairs (in
G
or out of guarantee)
call Kenwood customer care on
023 9239 2333. Have your
model number (ie BL460) and
date code (5 digit code ie
10D13) ready. They are on the
underside of the power unit.
spares and attachments
G
call 0844 557 3653.
other countries
G
Contact the shop where you bought
your appliance.
Designed and engineered by
G
Kenwood in the UK.
Made in China.
G
7