Advertisement
to use the masher (if supplied)
The masher can be used to mash
●
cooked vegetables such as
potatoes, swede and carrot.
Don't mash hard or uncooked foods
●
- you may damage the unit.
1 Cook the vegetables and drain.
2 Fit the masher collar to the masher
foot by turning in a clockwise
drection
.
3 Turn the masher upside down and fit
the paddle over the central hub and
turn anti clockwise to locate
the collar isn't fitted then the
paddle doesn't secure in
place).
4 Fit the power handle to the masher
assembly - push to lock.
5 Plug in.
6 Place the masher in the saucepan or
bowl etc., and select speed 1 on the
variable control and then press the
on button. Move the masher in an
up and down movement throughout
the mix until the desired result is
achieved.
7 After use release the on button and
unplug.
8 Press the blender shaft release
buttons to release the masher
assembly.
9 Remove the paddle from the masher
by turning clockwise.
10 Unscrew the collar from the masher
foot.
important
Never use the masher in a saucepan
●
over direct heat. Always remove the
saucepan from the heat and allow to
cool slightly.
Do not tap the masher on the side of
●
the cooking vessel during or after
mashing. Use a spatula to scrape
excess food away.
For best results when mashing never
●
fill a saucepan etc., more than half
full with food.
optional attachment (not
supplied in pack)
Mini chopper - refer to "service and
customer care" section to order.
care and cleaning
Always switch off and unplug before
●
cleaning.
Don't touch the sharp blades.
●
Take special care when preparing
●
food for babies, the elderly and
infirm. Always ensure that the hand
. (If
blender shaft is thoroughly sterilised.
Use a sterilising solution in
accordance with the sterilising
solution manufacturer's instructions.
Some foods, eg carrot, may
●
discolour the plastic. Rubbing with a
cloth dipped in vegetable oil may
help to remove discolouration.
power handle, whisk collar,
masher collar and chopper
cover
Wipe with a slightly damp cloth, then
●
dry.
Never immerse in water or use
●
abrasives.
Do not dishwash.
●
blender shaft
either
Part fill the beaker or a similar
●
container with warm soapy water.
Plug into the power supply, then
insert the blender shaft and switch
on.
Unplug, then dry
●
or
Wash the blades under running
●
water, then dry thoroughly
whisk, beaker, chopper bowl,
chopper blade, masher foot,
masher paddle, beaker and
bowl base/lids
Wash up, then dry.
●
5
Advertisement
