Ingress Filtering
Uplink
TPID
Buttons
: Click to apply changes.
The page includes the following fields:
Object
Port
Interface VLAN Mode
PVID
Accepted Frame Type
Ingress Filtering
Uplink
TPID
By default, the field is set to All.
If ingress filtering is enabled (checkbox is checked), frames classified to a
VLAN that the port is not a member of get discarded.
If ingress filtering is disabled, frames classified to a VLAN that the port is not a
member of are accepted and forwarded to the switch engine.
However, the port will never transmit frames classified to VLANs that it is not a
member of.
Enable/disable uplink function in trunk port.
Configure the type (TPID) of the protocol of switch trunk port.
Figure 4-5-6 Edit Interface Setting page screenshot
Description
The switch port number of the logical port.
Display the current interface VLAN mode.
Display the current PVID.
Display the current access frame type.
Display the current ingress filtering.
Display the current uplink mode.
Display the current TPID.
106
User's Manual of GSD-1002M