4.9.12 Storm Control
Storm control for the switch is configured on this Page.
There is an unknown unicast storm rate control, unknown multicast storm rate control, and a broadcast storm rate control.
These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.
4.9.12.1 Global Setting
The Storm Control Global Setting and Information screens in
The page includes the following fields:
Object
Unit
Preamble & IFG
Buttons
: Click to apply changes.
The page includes the following fields:
Object
Unit
Preamble & IFG
Figure 4-9-69 Storm Control Global Setting page screenshot
Description
Controls the unit of measure for the storm control rate as "pps" or "bps". The
default value is "bps".
Set the excluded or included interframe gap
Figure 4-9-70 Storm Control Global Information page screenshot
Description
Display the current unit.
Display the current preamble & IFG.
Figure 4-9-69
&
Figure 4-9-70
246
User's Manual of GSD-1002M
appear.