Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
DEFROST HEATER
Defrost Heater
Connectors
Refer to page 4-14 for the procedure for ac-
cessing the defrost heater.
1.
Unplug refrigerator or disconnect power.
2.
Disconnect the defrost heater wire con-
nectors from the main harness.
Set the ohmmeter to the R x 1 scale.
3.
4.
Touch the ohmmeter test leads to the
heater connector terminals. The meter
should indicate between 20 and 40 Ω.
Electrical Shock Hazard
DUAL WATER VALVE
Refer to page 4-17 for the procedure for ac-
cessing the dual water valve.
1.
Unplug refrigerator or disconnect power.
2.
Disconnect the wire connectors from the
dual water valve terminals.
3.
Set the ohmmeter to the R x 1 scale.
4.
Touch the ohmmeter test leads to the in-
dicated water valve solenoid terminals.
The meter should indicate as follows:
a) Small terminals (yellow connector) =
200 to 300 Ω.
b) Large terminals (brown connector) =
150 to 250 Ω.
5-3
Large
Terminals
Small
Terminals