Removing The Water Dispenser Switch Assembly - KitchenAid KBFA20ER Technical Education

REMOVING THE WATER DISPENSER SWITCH ASSEMBLY

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Turn off the water supply to the refrigerator.
3. Open the refrigerator compartment doors
and remove any items from around the
water dispenser switch.
Water Dispenser
Switch
4. Slide the water dispenser screw cover up
and remove it.
5. Remove the hex-head screw from the
water dispenser.
Screw
Water Dispenser
Screw Cover
4-5
6. Pull the top of the water dispenser out
and remove the water dispenser from the
liner.
7. Disconnect the two wires from the dis-
penser switch terminals.
8. Push and release the locking tabs on
the water dispenser switch, and pull the
switch off the housing pins.
Water Dispenser Switch
2 RD-WH
9. Disconnect the end of the water dispens-
er tube at the quick-disconnect coming
from the water reservoir.
Quick-Disconnect
Water Dispenser Tube
10. Remove the retaining clip and water tub-
ing from the water dispenser housing and
pull the end of the tube off the housing.
11. Pull the water dispenser tubing out of the
channel in the refrigerator liner.
Water Dispenser Tube
Clip
Tabs
YL
Water Reservoir