Removing The Ice Maker And Water Fill Tube - KitchenAid KBFA20ER Technical Education

REMOVING THE ICE MAKER AND WATER FILL TUBE

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Open the freezer compartment and re-
move the items inside to access the ice
maker.
Ice Maker
3. To remove the ice maker:
a) Remove the three hex-head mounting
screws from the freezer liner, (see the
top right photo), and remove the ice
maker.
b) Unlatch and disconnect the 4-wire pow-
er connector.
3 Screws
4. To remove the water fill tube:
a) Remove the ice maker (see step 3).
b) Turn off the water to the refrigerator.
c) Pull the refrigerator away from the wall.
d) Remove the two hex-head screws from
the water fill tube cover on the rear pan-
el.
e) Pull the water fill tube out of the freezer
liner.
f) Release the tube from the clamp and
pull the water tube off the fill tube.
4-13
Fill Tube
Connector
Fill Tube
Cover
Screws
Clamp
Pull Fill
Tube Out
Power