Removing The Front And Rear Rollers - KitchenAid KBFA20ER Technical Education

REMOVING THE FRONT AND REAR ROLLERS

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Pull the refrigerator away from the wall.
3. Unsnap and remove the air grille from the
refrigerator.
4. Pull the front roller cover off the roller you
are removing.
Front Roller Cover
Air Grille
5. To remove a front roller:
a) Tilt the refrigerator back approximately
3˝ and prop the front up.
b) Turn the silver (outer) leveling screw
to the left (counterclockwise) and re-
move the threaded end from the front
roller.
Front Roller Leveling Screw
c) Rotate the front roller so that the brack-
et tab aligns with the chassis slot, and
remove the roller.
Front Roller
6. To remove a rear roller:
a) Tape the refrigerator doors closed.
b) Tilt the refrigerator forward approxi-
mately 4˝ and prop the back up.
Continued on the next page.
4-23
Bracket
Tab In Slot