KitchenAid KBFA20ER Technical Education page 14

NOTE: The green, ground wire remains
attached to the hinge.
6. Remove the parts for the top hinge, as
shown in Top Hinge graphic, and lift the
left-hand side door from the bottom hinge
pin.
Remove the shim from the bottom hinge
7.
pin and keep it for later use (see Bottom
Hinge graphic).
Replace Doors and Hinges
1. Assemble the parts for the top hinge, as
shown in Top Hinge graphic. Do not tight-
en the screws completely.
Top Hinges
A. Hinge Cover Screw
B. Top Hinge Cover
C. / " Hex-Head Hinge Screws
5
16
D. Top Hinge
Bottom Hinges
A. Shim
B. Bottom Hinge
C. Hinge Screws
Wire Harness
DOOR REMOVAL AND REPLACEMENT
A
B
C
D
A
B
C
A.
2. Replace the parts for the bottom hinge as
shown in Bottom Hinge graphic. Tighten
screws. Replace the refrigerator door.
NOTE: Provide additional support for the
refrigerator door while the hinges are be-
ing moved. Do not depend on the door
gasket magnets to hold the door in place
while you are working.
3. Align the door so that the bottom of the
refrigerator door aligns evenly with the
top of the freezer drawer, and then tight-
en all of the screws.
4. Reconnect the wire harness on top of the
left-hand side refrigerator door.
5. Replace the top hinge covers.
1
A
/ " Set Screw
3
32
2-4
2
A
A. / " Set Screw
3
32