Ice Maker; Ice Maker Storage Bin - KitchenAid Superba KSRS22Q Use And Care Manual

Ice Maker
To start ice maker:
Push the ice maker signal arm
down to the ON position.
To stop ice maker:
Lift the ice maker signal arm until
you feel it click into the OFF
position.
Ice Maker Storage Bin
The ice maker storage bin can hold
up to 8.5 pounds of ice. Remove
unused ice periodically to reduce the
potential for off-taste or odor build¬
up in ice.
IMPORTANT: The first few batches
of ice from the ice maker may have
an off-taste. This is from new
plumbing and parts, and the ice
should be thrown away.
To remove storage bin:
The storage bin can be removed to
dispense large quantities of ice or
for cleaning.
1. Pull the covering panel out from
the bottom and slide it to the
rear.
2. Lift the ice maker signal arm until
you feel it click into the OFF
position. Ice can still be
dispensed when the freezer door
is closed, but no more can be
made.
3. Lift the front of the storage bin,
then pull it out.
4. Empty the bin. Use hot or warm
water to melt the ice if necessary.
Never use anything sharp to
break up ice in the bin. This can
damage the bin and dispenser
mechanism.
5. Wash with mild detergent. Rinse
well and dry. Do not use harsh or
abrasive cleaners or solvents.
To replace storage bin:
1. Make sure bin is pushed in all the
way.
2. Push the ice maker signal arm
down to the ON position to
restart ice production.
3. Lower covering panel.
12