D-Fi™ Usb Connectivity; Configuration (D-Fi™ Usb) - Chauvet Gobo Zoom USB User Manual

D-Fi™ USB
Connectivity
Configuration
(D-Fi™ USB)
D-Fi™ USB DIP Switch
Channels
Page 10 of 16
The Gobo Zoom™ USB is able to become a D-Fi™ wireless receiver/transmitter with the
use of the D-Fi™ USB from CHAUVET® DJ. Simply set the product's DMX Personality and
DMX Address, set the DIP switch D-Fi™ receiving/transmitting channel, then plug it into the
D-Fi™ USB port.
WARNING! DO NOT plug anything other than a D-Fi™ USB into the USB port. Doing
so may cause damage to the product.
Once plugged in, the D-Fi™ USB will take over the product. Wired DMX, manual
display control/menu buttons and IRC-6 will be unavailable until you unplug the
D-Fi™ USB. The priority levels are:
1. D-Fi™ USB
2. Wired DMX
1. Set the DMX Personality and DMX address on your product.
2. Use the Chart provided to set BOTH:
· the Channel, and then
· the Receiving or Transmitting option.
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
RECEIVING
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
TRANSMITTING
Gobo Zoom™ USB User Manual Rev. 1