Table of Contents
Advertisement
DMX Linking
Configuration
(DMX)
D-Fi™ USB
Connectivity
Configuration
(D-Fi™ USB)
D-Fi™ USB DIP Switch
Channels
Page 10 of 19
The Shocker™ Panel 180 USB works with a DMX controller. Information about DMX is in
the CHAUVET® DMX Primer, which is available from the Chauvet website
http://www.chauvetlighting.com/.
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
The Shocker™ Panel 180 USB is able to become a D-Fi™ wireless receiver/transmitter with
the use of the D-Fi™ USB from Chauvet DJ. Simply set the product's DMX Personality and
DMX Address, set the DIP switch D-Fi™ receiving/transmitting channel, then plug it into the
D-Fi™ USB port.
WARNING! DO NOT plug anything other than a D-Fi™ USB into the USB port. Doing
so may cause damage to the product.
Once plugged in, the D-Fi™ USB will take over the product. Wired DMX, manual
display control / menu buttons and IRC will be unavailable until you unplug the D-
Fi™ USB. The priority levels are:
1. D-Fi™ USB
2. Wired DMX
1. Set the DMX Personality and DMX address on your product.
2. Use the Chart provided to set BOTH:
· the Channel, and then
· the Receiving or Transmitting option.
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
RECEIVING
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
TRANSMITTING
Shocker™ Panel 180 USB User Manual Rev. 1
Advertisement
Table of Contents
