Eco Function - Kenwood FPM810 series Instruction Manual

Hide thumbs Also See for FPM810 series:
Table of Contents

Advertisement

key
processor
power unit
2
Trïtan™ bowl with drive shaft
3
detachable drive shaft
4
Trïtan™ lid
5
feed tube
6
pushers
7
safety interlocks
8
cord storage (at back)
9
auto button
bk
speed/pulse control
bl
power on light
weighing function
bm
kg/lb button
bn
display screen
bo
on/zero button
bp
weighing tray
thermoresist blender
bq
filler cap
br
lid
bs
goblet
bt
sealing ring
ck
blade unit
cl
filler cap vents
attachments
cm
knife blade
cn
dough tool
co
dual whisk
cp
folding tool
cq
max capacity disc
cr
4mm slicing/grating disc
cs
2mm slicing/grating disc
ct
extra fine grater disc
dk
fine Julienne disc
dl
decorative slicing disc
dm
mini bowl and blade
dn
attachment storage box
to use your food processor
1 Fit the bowl to the power unit. Place the handle towards the
back on the right hand side and turn clockwise
2 Fit an attachment over the bowl drive shaft.
Note: Detachable drive shaft
using the discs, mini bowl, whisk and folding tool.
l
Always fit the bowl and attachment onto the processor before
adding ingredients.
3
3 Fit the lid
- ensuring the top of the drive shaft/tool locates into
the centre of the lid.
l
The processor will not operate if the bowl or lid are
not fitted correctly into the interlock. Check that the
feed tube and bowl handle are situated to the right
hand side.
1
until it locks.
2
should be fitted when
4 Plug in. The Power On light will come on and flash until the bowl
and lid are fitted correctly. Select one of the following options: -
Auto Button – the light will come on when the Auto Button is
pressed and the optimum speed for the attachment will be
automatically selected.
Speed Control – manually select the required speed (refer to the
recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will operate
for as long as the control is held in position.
5 At the end of processing turn the speed control to the 'O' off
position or if using the Auto press the button and the light will go
out.
l
The Power On light will flash if either the lid or bowl
are not fitted or incorrectly fitted.
l
The Auto Button will not operate if a speed is
selected on the speed control.
l
Always switch off and unplug before removing the lid.
important
l
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.

Eco function

If the food processor is left plugged in for over 30 minutes
without being used, it will go into standby mode to reduce
energy consumption.
l
The Power On light will pulse slowly and the food processor will
not operate until one of the following actions are carried out:-
l
The Auto Button is pressed.
l
The speed control is turned to a speed and then turned back to
the 'O' off position.
The light will change to being constantly lit when ready to use.
Note: If the bowl or lid are not engaged into the interlock the
power on light with pulse more rapidly than the Eco function.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fpm810 series

Table of Contents