Kenwood FPM810 series Instruction Manual page 5

safety
l
Read these instructions carefully and retain for future reference.
l
Remove all packaging and any labels.
l
The blades and discs are very sharp, handle with care. Always hold by the
finger grip at the top, away from the cutting edge, both when
handling and cleaning.
l
Do not lift or carry the processor by the handle - or the handle may break
resulting in injury.
l
Always remove the knife blade before pouring contents from the bowl.
l
Keep hands and utensils out of the processor bowl and blender goblet whilst
connected to the power supply.
l
Switch off and unplug:-
l
before fitting or removing parts;
l
when not in use;
l
before cleaning.
l
Never use your fingers to push food down the feed tube. Always use the
pusher/s supplied.
l
Never fit the blade unit to the power unit without the blender
goblet fitted.
l
Before removing the lid from the bowl or blender from the power unit:-
l
switch off;
l
wait until the attachment/blades have completely stopped;
l
be careful not to unscrew the blender goblet from the blade assembly.
l
SCALD RISK: Hot ingredients should be allowed to cool to room temperature
before blending.
l
Do not use the lid to operate the processor, always use the on/off speed
control.
l
This appliance will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
l
Always unplug your food processor when not in use.
l
Never use an unauthorised attachment.
l
Never leave the appliance unattended when it is operating.
l
Never use a damaged appliance. Get it checked or repaired: see 'service &
customer care'.
l
Never let the power unit, cord or plug get wet.
l
Don't let excess cord hang over the edge of a table or worktop or touch hot
surfaces.
l
Do not exceed the maximum capacities stated in the recommended speed
chart.
2