Kenwood FPM810 series Instruction Manual page 12

to use the cutting discs
1 Fit the bowl onto the power unit, add the detachable drive shaft
2
.
2 Holding by the centre grip, place the disc onto the drive shaft with
the appropriate side uppermost
3 Fit the lid.
4 Put the food in the feed tube.
Choose which size feed tube you want to use. The pusher
contains a smaller feed tube for processing individual items or
thin ingredients.
To use the small feed tube - first put the large pusher inside the
feed tube.
To use the large feed tube - use both pushers together.
5 Switch on and push down evenly with the pusher - never put
your fingers in the feed tube.
hints
l
Use fresh ingredients
l
Don't cut food too small. Fill the width of the feed tube fairly full.
This prevents the food from slipping sideways during processing.
Alternatively use the small feed tube.
l
When using the Julienne disc, place ingredients horizontally.
l
When slicing or grating: food placed upright
shorter than food placed horizontally
l
Food placed upright comes out shorter than food placed
horizontal.
l
There will always be a small amount of waste on the disc or in
the bowl after processing.
dm
mini bowl and knife
Use the mini processor bowl to chop herbs and process small
quantities of ingredients e.g. meat, onion, nuts, mayonnaise,
vegetables, purées, sauces and baby food.
The slicing/grating discs can also be used with the mini bowl.
Insert the mini bowl without the knife blade fitted and refer to the
slicing/grating disc section for fitting and usage instructions.
Do not overfill the bowl.
mini blade
mini bowl
to use the mini bowl and knife
1 Fit the bowl onto the power unit, add the detachable drive shaft.
2 Fit the mini bowl over the detachable drive shaft - ensure the cut
out sections align with the locating tabs
Note: The main bowl lid cannot be fitted if the mini bowl is not
located correctly.
3 Place the knife blade over the drive shaft
4 Add the ingredients to be processed.
5 Fit the lid and switch on.
hints
l
Herbs are best chopped when clean and dry.
l
Always add a little liquid when blending cooked ingredients to
make baby food.
l
Cut foods such as meat, bread, vegetables into cubes
approximately 1-2 cm ( ⁄
1
2
l
When making mayonnaise add the oil down the feed tube.
bl
.
bm
comes out
bn
.
bo
on the main bowl.
bp
.
– ⁄ in) before processing.
3
4
dn
attachment storage box
Your food processor is supplied with a storage box for your bowl
attachments and discs.
1 Fit the knife blade and discs into the storage box when not in
br
use .
2 The storage box is fitted with a safety lock - close the lid to lock.
To open, push the tab in
care & cleaning
l
Always switch off and unplug before cleaning.
l
Handle the blades and cutting discs with care - they
are extremely sharp.
l
Some foods may discolour the plastic. This is perfectly normal
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
l
Wipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
l
Don't immerse the power unit in water.
l
Store excess cord in the storage area at the back of the power
bq
unit .
blender
1 Empty the goblet, unscrew the blade unit by turning to the
unlock position to release.
2 Wash the goblet by hand.
3 Remove and wash the seals.
4 Don't touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
dual whisk
l
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
l
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
folding tool
l
Detach the beater from the drive head by pressing the release
9
button . Wash in warm soapy water.
l
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
9
bs bt
and lift up the lid .