Kenwood FPM810 series Instruction Manual page 7

l
ALWAYS commence blending at a low speed and gradually increase the
speed. NEVER blend hot liquids by using the Pulse setting.
l
Liquids which tend to foam such as milk, should be limited to a maximum
capacity of 1000mls/4 cups.
l
Take care when handling the blender as the goblet and its contents will be
very hot.
l
Take particular care when removing the lid. The lid is designed to be a tight fit
to prevent leakage. If necessary protect your hands with a cloth or oven
gloves when handling.
l
Ensure the goblet is securely attached to the base and when removing from
the appliance, guide the base and ensure it is removed together with the
goblet.
l
Ensure that the lid and filler cap are securely in place before every blending
operation.
l
Always ensure that the vents in the filler cap are clear before every blending
operation cl .
l
When fitting the lid to the goblet always ensure that the lid and goblet rim are
clean and dry to ensure a good seal and prevent spillage.
slicing/grating discs
l
Never remove the lid until the cutting disc has completely stopped.
l
Handle the cutting discs with care - they are extremely sharp.
l
Do not overfill the bowl – do not exceed the maximum capacity level marked
on the bowl.
mini bowl and knife
l
Never remove the lid until the knife blade has completely stopped.
l
The knife blade is very sharp - always handle with care.
l
Do not process spices – they may damage the plastic.
l
Do not process hard food such as coffee beans, ice cubes or chocolate – they
may damage the blade
before plugging in
l
Make sure your electricity supply is the same as the one shown
on the underside of your appliance.
Important – UK only
l
The wires in the cord are coloured as follows:
Green and Yellow = Earth, Blue = Neutral, Brown = Live.
l
The appliance must be protected by a 13A approved (BS1362)
fuse.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Note:
l
For non-rewireable plugs the fuse cover MUST be refitted when
replacing the fuse. If the fuse cover is lost then the plug must not
be used until a replacement can be obtained. The correct fuse
cover is identified by colour and a replacement may be obtained
from your Kenwood Authorised Repairer (see Service).
l
If a non-rewireable plug is cut off it must be DESTROYED
IMMEDIATELY. An electric shock hazard may arise if an
unwanted non-rewireable plug is inadvertently inserted into a 13A
socket outlet.
l
This appliance conforms to EC directive 2004/108/EC on
Electromagnetic Compatibility and EC regulation no. 1935/2004
of 27/10/2004 on materials intended for contact with food.
before using for the first time
1 Remove the plastic blade covers from the knife blade. Take
care the blades are very sharp. These covers should be
discarded as they are to protect the blade during manufacture
and transit only.
2 Wash the parts see 'care & cleaning'
4