Status Screen - Sony PXW-FS7 Operating Instructions Manual

Solid-state memory
Hide thumbs Also See for PXW-FS7:
Table of Contents

Advertisement

Information displayed on the screen during
playback
The following information is superimposed on
the playback picture.
1.
Clip number / total number of clips
2.
Playback mode
3.
Remaining battery capacity indicator
4.
Playback format (picture size) indicator
5.
Playback format (frame rate) indicator
6.
Playback format (codec) indicator
7.
Wi-Fi connection status indicator
(page 51)
Displayed when the Wi-Fi function is set to
"Enable." When the IFU-WLM3 is not attached
to the camcorder,
8.
Media indicator
9.
Audio level indicator
Displays the audio level when recording.
10.
Time data indicator
When Display On/Off >Timecode in the VF
menu is set to "On," it displays the time data
when the DISPLAY button is pressed.
is not displayed.

Status Screen

To display the status screen:
• Push the STATUS CHECK button.
To switch to the status screen:
• Turn the SEL/SET dial.
• Move the multi selector up/down.
To hide the status screen:
• Push the STATUS CHECK button.
Camera Status screen
Displays the electronic shutter setting of the
camera and the lens status.
ISO/Gain/EI<H>
ISO/Gain/EI<H> setting
ISO/Gain/EI<M>
ISO/Gain/EI<M> setting
ISO/Gain/EI<L>
ISO/Gain/EI<L> setting
Shutter
Shutter setting (Speed/Angle/
ECS/Off)
Iris
F-stop value obtained from the
lens
Zebra1
Zebra1 On/Off setting and level
Zebra2
Zebra2 On/Off setting and level
Gamma
Gamma Select setting
White
White balance mode and settings
Focal Length
Focal length value obtained from
the lens
AE Level
AE level setting
AE Speed
AE control speed setting
AGC Limit
Maximum gain setting of the
AGC function
A.SHT Limit
Fastest shutter speed of the auto
shutter function
AE Mode
AE mode setting (Backlight/
Standard/Spotlight)
15

Advertisement

Table of Contents
loading

Table of Contents