Thumbnail Screen; Screen Layout - Sony PXW-FS7 Operating Instructions Manual

Thumbnail Screen

Thumbnail Screen
The thumbnail screen appears if you press the THUMBNAIL button (page 9). The thumbnail screen
displays the clips stored on XQD memory cards as thumbnails (index pictures).
You can select a clip on the thumbnail screen and start playback of that clip. The playback image can be
displayed in the viewfinder and on an external monitor.
Pressing the THUMBNAIL button again closes the thumbnail screen and returns to the camera image.
Notes
• Only the clips recorded in the currently selected recording format are displayed on the thumbnail screen. If an expected
recorded clip is not displayed, check the recording format. Take special note of this fact before formatting (initializing)
media.
• When Codec >Select in the System menu is set to one of the following, recording cannot be started during playback or
when the thumbnail screen is displayed.
RAW & XAVC-I, RAW & XAVC-L, RAW & MPEG HD422

Screen Layout

Information for the clip at the cursor position is displayed at the bottom of the screen.
Currently selected XQD memory card indicator
(A lock icon is displayed if the card is protected.)
Cursor
(yellow)
1.
Thumbnail (index picture)
Displays the index picture of a clip. When a clip
is recorded, its first frame is automatically set as
the index picture.
Clip/frame information is displayed below the
thumbnail. You change the information
displayed using Customize View (page 84)
>Thumbnail Caption in the Thumbnail menu.
Clip number/Total number of clips
2.
Clip name
Displays the name of the selected clip.
3.
Recording video format
Displays the file format of the selected clip.
55