Displaying The Wi-Fi Remote Control - Sony PXW-FS7 Operating Instructions Manual

Displaying the Wi-Fi
Remote Control
The Wi-Fi Remote screen is automatically
resized to match the screen size of the connected
device.
1
Connect the camcorder and device
using a Wireless LAN connection
(page 53).
2
Launch a browser on the device and
enter "http://IP address of camcorder
(Wi-Fi >IP Address in System menu)/
rm.html" in the URL bar.
For example, if the IP address is 192.168.1.1,
enter "http://192.168.1.1/rm.html" in the
URL bar.
3
Enter the user name and password
(Basic Authentication >User Name and
Password in the System menu).
When connection is successful, the Wi-Fi
Remote screen appears on the device.
You use the Wi-Fi Remote screen to operate
the camcorder.
You can disable the record button operation
by sliding the Lock knob to the right.
Notes
• To display the page for a smartphone, change
"rm.html" to "rms.html" in the URL. To display the
page for a tablet, change "rm.html" to "rmt.html" in
the URL. When "rm.html" is entered, the page
automatically switches for display on the
corresponding device. However, the appropriate page
may not be displayed, depending on the device.
• The Wi-Fi Remote screen may not match the
camcorder settings under the following circumstances.
If this occurs, reload the browser window.
- If the camcorder is restarted while connected
- If the camcorder is operated directly while
connected
- If the device has been reconnected
- If the browser Forward/Back buttons have been
used
• The Wi-Fi remote control may not function if the
wireless signal strength becomes weak.
54