Setting The Clock - Sony PXW-FS7 Operating Instructions Manual

Removing the grip remote control
1
Disconnect the grip remote control
cable from the REMOTE connector on
the camcorder.
2
Remove the arm from the camcorder.

Setting the Clock

The initial settings screen appears in the
viewfinder the first time the camcorder is turned
on or after the backup battery has become
completely discharged.
Set the date and time of the internal clock using
this screen.
Time Zone
Time Zone sets the time difference from UTC
(Coordinated Universal Time). Change the
setting as required.
Setting the date and time
Turn the SEL/SET dial (page 9) to select items
and settings, then press the SEL/SET dial to apply
the settings and start the clock running.
Once the settings screen is closed, you can change
the date, time, and time zone settings using Clock
Set (page 93) in the System menu.
Notes
• If the clock setting is lost because the backup battery
becomes fully discharged due to power being
disconnected for an extended period (no battery pack
and no DC IN power source), the initial settings screen
will be displayed when you next turn the camcorder
on.
• While the initial settings screen is displayed, no other
operation, except turning the power off, is permitted
until you finish the settings on this screen.
• The camcorder has a built-in rechargeable battery for
storing the date, time, and other settings even when the
camcorder is turned off. For details about the built-in
rechargeable battery, see (page 100).
25