Sony PXW-FS7 Operating Instructions Manual page 66

Camera
Item Sub-item setting
Flicker Reduce Mode
Auto / On / Off
Flicker correction
settings
Frequency
50Hz / 60Hz
SteadyShot
Setting
Active SteadyShot /
Image stabilization
SteadyShot / Off
settings
Handle Zoom
Zoom Speed Type
Fix / Variable / Off
Handle zoom
settings
Zoom Speed
1 to 8 (3)
Auto Black Auto Black Balance
Balance Execute / Cancel
Auto black
balance settings
AF Micro
Setting
On / Off
Adjustment
Focus position
Amount
micro adjustment
–20 to 0 to +20
(Enabled when
LA-EA2/4
(option) is used)
Clear All
Execute / Cancel
Video Light Video Light Set
Power Link / Rec Link /
Set
Rec Link + Stby
Video light
settings (when
using HVL-LBPC
(option))
Description
Sets the flicker correction mode.
Sets the frequency of the power source supplying the lighting
that is causing the flicker.
Turns the image stabilization function on/off.
Note
Enabled when a compatible lens is attached.
Sets the mode of the zoom lever on the handle.
Note
Disabled when the handle is not attached.
Sets the speed of the handle zoom.
(Enabled when Zoom Speed Type is set to Fix)
Note
Disabled when the handle is not attached.
Runs the auto black balance function.
Notes
• Run the auto black balance function with the lens cap
attached.
• Cannot be run during recording or color bar display.
• Cannot be run when in Interval Rec mode, Frame Rec mode,
Slow & Quick Motion mode, or Slow Shutter mode.
Turns the auto focus micro adjustment function on/off.
Sets the auto focus micro adjustment level.
Use the following procedure to adjust A-mount lenses.
1
Attach the lens you want to adjust using an LA-EA2/4
(option).
2
Set Setting to On, and adjust the Amount value.
Positive values move the focus behind the subject, and
negative values move the focus in front of the subject.
It is recommended that you check the result using one-push
AF, for example, while adjusting the focus.
Initializes the saved adjustment values.
Sets the lighting control method for the video light attached to
the multi-interface shoe.
Power Link:
Turns the video light on/off when the camcorder is turned
on/off.
Rec Link:
Turns the video light on/off when the camcorder starts/
stops recording.
Rec Link + Stby:
Turns the video light on/off when the camcorder is
recording or in standby mode.
66