Sony PXW-FS7 Operating Instructions Manual page 70

Paint
Item Sub-item setting
White Clip
Setting
On / Off
White clip
adjustment
settings
Level
When Country is not set to PAL
Area.
90.0% to 109.0% (108.0%)
When Country is set to PAL Area.
90.0% to 109.0% (105.0%)
Detail Setting
On / Off
Detail adjustment
settings
Level
–99 to +99 (±0)
H/V Ratio
–99 to +99 (±0)
Crispening
–99 to +99 (±0)
Level Depend
On / Off
Level Depend Level
–99 to +99 (±0)
Frequency
–99 to +99 (±0)
Knee Aperture
On / Off
Knee Aperture Level
–99 to +99 (±0)
Limit
–99 to +99 (±0)
White Limit
–99 to +99 (±0)
Black Limit
–99 to +99 (±0)
V Black Limit
–99 to +99 (±0)
V Detail Creation
NAM / Y / G / G+R
Description
Turns the white clip adjustment function on/off.
Note
Cannot be set when Gamma >Gamma Category is set to
S-Log2 or S-Log3.
Sets the white clip level.
Turns the detail adjustment function on/off.
Sets the detail level.
Sets the mix ratio between the H detail level and the V detail
level.
Sets the crispening level.
Turns the level dependence adjustment function on/off.
Sets the level dependence level.
Sets the center frequency of the detail (detail thickness).
The detail is thinner the higher the center frequency, and
thicker the lower the center frequency.
Turns the knee aperture correction function on/off.
Sets the knee aperture level.
Sets the detail limiter for both the white-side and black-side
directions.
Sets the white-side detail limiter.
Sets the black-side detail limiter.
Sets the black-side V detail limiter.
Sets the signal source for creating the V detail to NAM (G or
R, whichever is higher), Y, G, or G+R.
70